You may be thinking to yourself, “What do spray foam roofing contractors do?” To most people, this is a foreign term. It is just another material that professionals use to make a difference in the way you live. With that said, there is so much more to it than most people know. Read on to find out how they benefit homeowners everywhere.
First, Spray Foam Roofing Contractors are responsible for making sure that your roof is installed correctly. This is crucial, especially if it is being put on a hot summer day. Once properly installed, the foam will expand up to twenty-five percent when appropriately sprayed and forms a durable, seamless roof.
This is just the tip of the iceberg though. Not only is it responsible for keeping the structure safe, but it also has the ability to improve its aesthetics tenfold. From a business standpoint, this type of roofing material can increase the value of your commercial property by creating a barrier between the building and the outside elements. If you are thinking of selling your property, this type of roof material will definitely give it an edge over competitors.
Another important benefit to spray foam roofing contractors is that it provides superior UV protection. Unlike many other types of shingles and tiles, it will not degrade over time due to exposure to the sun. It is made with a special rubber granules that act as air pockets, allowing it to keep its color and strength during harsh sunlight.
Of course, not all spray foam roofing contractors are created equally. There are many companies out there that use inferior materials in order to knock down your roof’s integrity and make it more susceptible to leaks and other issues. To avoid these problems, look for a contractor that uses the highest quality granules. This ensures that you get a long-lasting product that can withstand even the harshest of conditions. Look for a provider that offers guaranteed installation and guarantees on repairs as well.
Unfortunately, there are some bad foam contractors out there who will use whatever they can get their hands on. Some will cut corners and use cheap materials, sacrificing quality in the name of price. However, when this happens, you are not getting the results you want. Worse, you may be getting sprayed from underneath because the poor installer used an inferior sealer. When this happens, you will have nothing but ugly water damage and an exposed, leaking membrane.
If a sprayer has been damaged by rain or melted snow, it may contain harmful particles that can leak into the seams and seal coats. A poorly installed seal coat contains tiny granules of silicone coating. When this happens, it will be difficult for you to clean. Instead, you will just have to replace the piece that has leaked.
Finally, ask the contractor if they used any urethane or UV rays in the installation process. Using urethane can enhance the life of your roof, but it can also increase the risk of leaks. UV rays are known to weaken the structural steel of your existing roof system. It is common for spray contractors to include ultraviolet rays in their bid for your job. Make sure you know what was used and ask if there were any visible signs of these two chemicals.
Lastly, ask the contractor about the materials that were used. The most common material being used nowadays is either fiberglass or polyurethane. Fiberglass is also cheaper than urethane. However, these two materials are not effective against extreme temperatures. Since your foam roofing has to be installed in high-tempered areas, it’s better to use a urethane coating.
Foam roofing is best installed by professional installers. Do not attempt to do the job yourself. This is because the process involves more than just spraying foam onto your roof. You need to prepare the area and then set up your instruments to make sure you don’t miss a single part. Failure to properly install your foam roofing could lead to leakages and other complications.
For example, check if you have applied the coating correctly. If you did, you should not have to pay for reapplication. But if the coating did not go in smoothly, you might have to sand the areas where there was a crack. Applying the coating, the correct way is important to get optimal results. When you hire a sprayer that has been properly trained, you can be assured that the job will be done right.